Technology

Steel load for hot recycling

It is a system that combines the steel load to recycle through a tunnel, with the re-use of the energy (heat) generated by the fusion process to reheat the steel, rising the temperature of the raw material more than 800 degrees before entering the furnace and improving loading times in order to increase energy efficiency, reduce cost production and increase the casting process capacity.

EFSOP

A System that allows the Optimal Dynamic Control of Chemical Energy combined with Electrical Energy during the fusion process.

Slitter

It allows the rolling mill to produce low gauge rods according to the needs of the customers, by splitting the billet into several rods during the last part of the Rolling process. This technology considerably improves accuracy and safety in the rolling mill and generates efficiency in production times and costs.

High-Speed Electromagnetic Coil

It is used at the end of the wire rod production to wind it at high speed. It uses a magnetic field that reduces vibration, increases the speed in the process, and improves its reliability.

Technological progress in wire plants

High-Speed Galvanizing Lines

Annealing

It replaces the use of gas with electrical energy to heat the wire before galvanizing, which provides higher speed in annealing, more processing capacity, and less space consumption.

Draining

It uses a gas-injection draining process, which optimized the use of zinc and increases the drying speed, allowing it to control the required zinc layer according to the needs of the customer.

Wire Product Lines

High-speed hexagonal mesh

Innovation that pre-bends and twists the wires continuously, to increase the speed and efficiency of the process.

High-speed barbed wire lines

It increases the speed and efficiency of the production process.

Packaging and winding

It automates the packaging process of the final product to allow it to increase speed and safety of the process.